Environmental monitoring

Environmental monitoring solutions for WA sites

We provide environmental monitoring solutions for mining, construction, infrastructure, industrial and agricultural sites across Western Australia.

Our stations measure dust, air quality, noise, vibration, water, ground gas and weather and send the data to you in real time so you can meet your approval conditions and act before a limit is exceeded. All solutions are site-tailored and account for each of the contaminants or parameters that concerns your project.

Enquire now

Enquire About Groundwater Monitoring

ENVIRONMENTAL MONITORING

Environmental monitoring stations built for WA​

Our services range from attended monitoring by our accredited staff to fully autonomous stations built in-house with full remote telemetry and SMS/email alerts.

Autonomous systems let you access your data in real time, make informed management decisions and produce reports on demand through our Client Portal. Equipment is built to be flexible, mobile, efficient and accurate, reducing time on site and the financial cost of proactive compliance.

Solar powered

Deep cycle batteries and solar panels keep equipment operating for long periods between site visits

Automated reporting

Customised, automated reports save you time digging through data you don’t need

Data storage

All data is stored in cloud-based servers accessible from the office, at home or on the road

5G connectivity

GPRS modems keep you connected

Alerts

Customisable SMS, email and visual alerts notify you whenever a threshold is breached and

our solutions

Tailored systems and solutions

Most sites need to measure more than one thing.

A quarry may have dust, blast and noise limits in the same licence. A remediation site may need groundwater, ground gas and air monitoring together.

We design each program around your obligations, the receptors near your site and how long the work runs. Then we supply, install, maintain and report on the equipment for the life of the project.

Our environmental monitoring services

Air Monitoring. We offer short- and long-term ambient air quality monitoring solutions. Our stations offer aerosol monitors for simultaneous PM1, PM2.5, PM10 and total PM size fraction measurements, and total suspended particulates. Gases monitored include carbon monoxide (CO), oxygen (O2), nitric oxide and nitrogen dioxide (NOx), sulphur dioxide (SOx) and hydrogen sulphide (H2S).

Dust Monitoring. We offer short- and long-term dust monitoring solutions designed in line with the National Environment Protection (Ambient Air Quality) Measure (NEPM). Our stations use dust deposition gauges, Beta Attenuation Monitors (BAM) and Tapered Element Oscillating Microbalances (TEOM) to measure PM2.5, PM10, total suspended particulates and nuisance dust. Solar units with deep cycle battery banks run for up to 10 days in poor weather and send SMS and email alerts when dust levels rise.

Noise Monitoring. We offer short- and long-term ambient noise monitoring solutions. Noise monitoring applications may include background studies, out-of-hours construction monitoring, scientific environmental projects, licence and approval requirements and noise investigations.

Soil Testing and Analysis. We undertake soil sampling and analysis for all parameters and projects, including identification and management of acid sulphate soils (ASS), presence of asbestos, contamination investigations, site investigations and management, incident and emergency response and nutrient analysis for agricultural purposes. All sampling is undertaken by one of our professionals and testing by a NATA accredited laboratory.

Vibration Monitoring. We offer short- and long-term ambient vibration monitoring solutions. Whether the project involves demolition, railway or construction work, heritage buildings, sensitive asset management or investigative studies, our monitoring systems and professional team help you achieve your project goals.

Water Monitoring. We offer short- and long-term environmental water monitoring solutions. For surface water, groundwater, domestic potable water or dewatering and industrial discharge management, we offer monitoring programs and professional sampling and testing through NATA accredited laboratories. Managing water well depends on a good understanding of the resource and its potential impacts.

Ground Gas Monitoring. We offer short- and long-term gas monitoring solutions. Ground gases produced by landfills, contaminated soils and waste decomposition, and gases present in manufacturing or processing facilities, can pose a health and safety risk. Monitoring for the presence of gases, and their ongoing management, keeps personnel safe.

Weather Stations. We offer short- and long-term weather monitoring solutions. Weather monitoring covers wind speed, direction, rainfall and humidity, and can also include heat stress calculation, wet leaf sensors and evaporation. The data can be used to manage noise, dust and odour drift, evaporation ponds, heat stress, crops and livestock.

Blast Monitoring. We offer real-time remote access blast monitoring stations to suit your mining or quarrying project. Our weather-protected, portable and permanent blast monitoring stations are dedicated to real-time measurement and automated reports.

Agricultural Monitoring. We offer short- and long-term agricultural monitoring solutions. Our remote monitoring stations monitor environmental conditions and control ancillary devices such as cattle feeders and watering stations, including live video monitoring, so your crops or cattle are managed appropriately.

Time-Lapse Cameras. We offer short- and long-term time-lapse photography solutions. Time-lapse photography is one of the most popular tools for documenting a project’s development. A well-designed time-lapse installation shows project progress and keeps clients and shareholders informed.

Not sure what your site needs?Send us your license or approval and we’ll scope the work for you.

Integrated monitoring: several targets from one station

Many sites run separate monitors for dust, noise, vibration and weather, each with its own logger, login and report. We build integrated stations that combine multiple sensors in one enclosure on one power supply, reporting to one portal.

This has three key benefits:

  • One installation, one set of power and communications hardware and one maintenance visit instead of several
  • Data from every sensor on a single timeline, which makes it easier to identify the source of an exceedance and defend a complaint
  • One set of alerts and one automated report for your environmental manager and the regulator

Integrated stations suit quarries, mines and city projects where you are subject to several standards or limits at the same time.

The compliance and safety risks of poor environmental monitoring

There is almost guaranteed to be a host of vibration, contaminant or other requirements written into your development approvals or construction management plans. Monitoring data is tangible evidence that you are meeting those obligations.

If the monitoring is missing, unreliable or not reported, you expose your project to:

  • Licence breaches: Gaps in data, uncalibrated equipment or late reports can themselves breach a licence, even when actual emissions were within limits.
  • Exceedances you find out about too late: Without real-time alerts, a dust, noise or vibration exceedance is often discovered when data is downloaded days later, after the complaint or damage.
  • Having no evidence in a dispute: When a neighbour reports cracking, dust on cars or night-time noise, continuous records are the only thing that can show whether your site was the cause.
  • Stop-work notices and delays: Regulators and local governments can halt works while an exceedance or complaint is investigated and projects without data have nothing to bring to that discussion.
  • Health risks to workers and the community: Fine particulates are the most obvious example here – exposure of 25 µg/m³ for PM2.5 and 50 µg/m³ for PM10 harms health. Unmonitored gas, dust and noise exposure carries similar risks for people on and around your site.

Data quality matters as much as coverage, which is why our samples are tested by NATA accredited laboratories and our stations are checked regularly throughout each program.

Arrange a consultation today

Our team are ready and available to design and deploy environmental monitoring systems across Western Australia. Working with us, you benefit from:

  • Field-first team experienced with WA’s regulatory and environmental landscapes
  • Fast mobilisation across Perth metro and the regions
  • Stations built in-house for flexibility and remote, long-term deployment
  • NATA accredited sampling and analysis
  • Same day turnaround available 7 days a week
  • Regulator-ready reporting, from project planning through to ongoing compliance

Speak with our team and get environmental monitoring set up on your site today